Sf6 Gas Insulated Load Break Switch Switchgear 12kv 22kv Ring Main Unit (rmu) Switchgear Indoor Power Substation /Lbs Breaker/Load Break Switch

• Task: Sf6 Gas Insulated Switch Protection System
• Structure: Combination Can Also Be Used Independently
• Mathematical Model: Sf6 Insulated
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: XGN15-12/630-25
• Signal: Remote Control Microcomputer Protection
• Function: Automatic Control, Protection, Monitoring, Measurement
• Certification: RoHS, CCC, ISO: 9001, CE, Custimozed
• Condition: New
• Customized: Customized
• Material: Galvanized Steel Plate
• Switch: Earthing, Fuse, Microcomputer(for 35kv)
• Types: Sf6 Load Break Switch
• Operation: Manual /Mortor Mechanism
• Rated Voltage: 12kv 24kv 35kv 40.5kv
• Rated Current: 630A
• Ability: Can Instead of Sm6 Use
• Package: Wooden Pallet
• Orginal Place: Yueqing, Zhejiang, China
• Sf6 Switch: Sf6 Load Break Switch
• Withstand Current: 25ka
• Switching Mode: Switching Mode
• Transport Package: Wooden Pallet
• Specification: 600x900x2000
• Trademark: MINGZHE
• Origin: China
• HS Code: 8537209000
• Production Capacity: 2000set/Week

Product Description

Product Description

1.Brief Introduction

    XGN15-12(L)/T630-25 0r XGN15-12(L . R)/T100-31.5 Cubicle fixed AC metal enclosed switchgear is mainly used for looped network power supply or biradial power supply of electric power system with 3-phase ,AC 50Hz and rated voltage 10KV. It also can be used for terminal power supply as the control device of electric energy and protection device of utilization equipment. More over, it also can be suitable for this switchgear
to be installed in the box substation, especially compact box substation.

2.Service Environmental Condition
 Altitude: .< lOOOm
Ambient temperature: -25aC ~ +400C
Relative humidity: The daily average value is not more than 95% and the monthly mean value is not more than 90%.
The surrounding air shall not be polluted by corrosive gas and flammable gas as well as water vapor and so on obviously.
. No location of recurrent strenuous vibration

3.Main structure of switch cabinet
It consists of such parts as bus compartment, 3-position load switch compartment (or circuit breaker compartment), cable compartment, actuator, interlocking mechanism and low-voltage control room as well as measuring circuit or metering circuit and so on. Every compartment is separated by the steel plate so that the fault part avoids affecting the adjacent compartment. It conforms to the GB3906 and IEC298 standard and so on.

. Bus compartment
The bus compartment is arranged on the upper part of cabinet body. The main buses are connected together in the bus compartment and they passes through the whole array of switch cabinet. The arrangement of bus is horizontal and it can be spread out conveniently.

. Load switch compartment
There is a 3-position load switch installed in the switch compartment. The casing of load switch is poured by the epoxy resin. The Sf6 gas is refilled as the arc-extinguishing and insulating medium in the compartment. There are 2 transparent plastic end cover by means of thermal forming installed at the leading end of operating shaft. The contact state can be observed through it. The SF6 gas density gauge or gas density apparatus with alarm contact is installed in the switch compartment according to the client requirement.

. Cable compartment
The cable compartment is mainly used for cable connection. For the connection of single-core cable, the simplest non-shielded cable head is used. At same time, there are such elements as lightning arrester, current transformer and lower grounding switch and so on also can be contained in the enough room. There are observation window and safety interlocking device in the cabinet door as per the standard design. The back plate in the cable compartment is equipped with the sealing cover and appropriate size of cable clamp with support. The frame in front of door at the back plate in the cable compartment can be dismounted for easy cable installation.

. Operating mechanism , interlocking mechanism and low-voltage control room
The low-voltage room with interlocking functions as the screen control at same time. The low-voltage room is equipped with the spring actuator with position indicator and mechanical interlocking device. The auxiliary contact, tripping coil, emergency tripping mechanism, capacitor-type charged display device, key lock and electrical operation device are installed in the low-voltage room. At same time, the control circuit and metering instrument as well as protection relay also can be installed in the spacing of low-voltage room.
There are 2 same low-voltage rooms installed in the 750mm wide cabinet and more accessories can be installed in this size of cabinet.
 

Product Parameters

 

 4.The main technical parameters  

NO.	Item			Unit	Technical parameters
					XGN15-12(F)		XGN15-12(F,R)
1	Rated  voltage			KV	12
2	Rated  Frequency			Hz	50
3	Rated insulation level	1 min power frequency withstand voltage		Kv	To-Grounding and phase -to-phase42;Isolating distance48
		Lighting impulse withstand voltage(peak)		kv	To-Ground and phase-to-phase 75; Isolating distance85
4	Rated current of main bus			A	630
6	Rated  current			A	630	125
7	Rated closed loop breaking current			A	630
8	Rated charging breaking current			A	10
9	Rated  transfer current			A		1700
10	Breaking no-load transformer capacity			KVA	1600
11	Rated making current(peak)			KA	63
12	Rated short-time withstand current			KA	25
13	Rated peak withstand current			KA	63
14	Rated short-circuit breaking current			KA
15	Peak withstand current of ground circuit(prospective)			KA	63	31.3(Prospective)
16	Short-time withstand current of grounding circuit			KA	25
17	Fuse model					SLAJ
18	Rated voltage of auxiliary circuit			V	DC220 110 AC220 110
19	IP Code				IP3X
20	Mechanical life		Load switch (times)	Times	5000
			Earthing switch(times)	Times	2000

5.Ring main unit configuration table

	Name	Description	Unit
Load break switch	FL+C2:D7+C2:D12N36- 24/630-20	Load break switch for Two positions, no earthing with Gas-pressure meter	Set
	FL(R)N36- 12D/630-20	Load break switch for Three positions with Gas-pressure meter	Set
	FLN36- 24/630-20	Load break switch for Two positions, no earthing with Gas-pressure meter	Set
	FL(R)N36- 24D/630-20	Load break switch for Three positions with Gas-pressure meter	Set
	FL(R)N36- 35/630-20	Load break switch for Two positions, no earthing with Gas-pressure meter	Set
	FL(R)N36- 35D/630-20	Load break switch for Three positions with Gas-pressure meter	Set
Operating mechanism	Organization for in line	Manual operation for K type(No button) (not suitable for fuses)	Set
	Organization for in and out line	Manual operation for A type(with button)	Set
	Organization for in and out line	Electric operation AC220V	Set
	Organization for in line	Manual for closing and electric for Opening	Set
Only for 12kv 24kv (outgoing line) 35kv load break switch is protected by microcomputer	Fuse holders	Top and bottom fuse holder 6pcs totally	Set
	Fuse	(See the below)	Set
Interlock system	Down door interlock	The interlock for down door	Set
	Trip device(Including the trip system and trip  interlock,work together with fuse holders)	Trip system	Set
		Trip interlock	Set
	Earthing interlock	500 #/375# earthing components	Set
	Sensors	3pcs as one set	Set
	Voltage Indicator	L-6	Set

The general selection principle of rated current of the fuse element selected by transformer capacity is shown in table 

Transformer capacity (kVA)	100	125	160	200	250	300 315	400	500	630	750 800	1000		1250
Rated current of fuse element (A)	16			20	25	31.5	40	50	63	80		100

6. According to the actual use, the SF6 RMU (SM6) cabinet has the following devices.

SF6 (SM6) Switchgear cabinet types
NO.	Name	Specification	Unit	Qty		NO.	Name	Specification	Unit	Qty
	XGN15-12 Lifttlig Switchgear		Set	1			XGN15-12 Outline Switchgear		Set	1
1	Lighting Arrester	HY5WS 17/50	Set	1		1	SF6 load break swith	FRLN36-12D/125-31.5	Set	1
2	Voltage display	L-6	Set	1		2	Operating mechanism	Manual for closing and Electric for Open
3	Electromagnetic lock	DSN-Y	Set	1		3	Gas meter		Set	1
4	Sheet metal	375*916*1635	Set	1		4	Outline Electromagnetic lock	375#	Set	1
						5	Lighting Arrester	HY5WS 17/50	Set	1
NO.	Name	Specification	Unit	Qty		6	Sensor	CG5-10 140mm	Set	1
		XGN15-12 Mertering Switchgear	Set	1		7	Voltage display	L-6	Set	1
1	Sensor	CG5-10 140mm	Set	1		8	Fuse	10A-63A	Set	1
2	Voltage display	DXN-Q	Set	1		9	Sheet metal	375*1000*1635	Set	1
3	Electromagnetic lock	DSN-Z 220V	Set	1
4	Sheet metal	750*916*1635	Set	1		NO.	Name	Specification	Unit	Qty
								XGN15-12 Outline Switchgear	Set	1
NO.	Name	Specification	Unit	Qty		1	SF6 load break swith	FRLN36-12D/125-31.5	Set	1
		XGN15-12 Inline Switchgear	Set	1		2	Operating mechanism	Electric AC2200	Set	1
1	SF6 load break swith	FLN36-12/620-20	Set	1		3	Gas meter		Set	1
2	Operating mechanism	Manual A type	Set	1		4	Outline Electromagnetic lock	375#	Set	1
3	Gas meter		Set	1		5	Lighting Arrester	HY5WS 17/50	Set	1
4	Interlock for up and down door		Set	1		6	Sensor	CG5-10 140mm	Set	1
5	Lighting Arrester	HY5WS 17/50	Set	1		7	Voltage display	L-6	Set	1
6	Sensor	CG5-10 140mm	Set	1		8	Fuse	10A-63A	Set	1
7	Voltage display	DXN-Q	Set	1		9	Sheet metal	375*1000*1635	Set	1
8	Electromagnetic lock	DSN-Z 220V	Set	1
9	Sheet metal	375*916*1635	Set	1		NO.	Name	Specification	Unit	Qty
								XGN15-12 Inline VCB switchgear	Set	1
NO.	Name	Specification	Unit	Qty		1	VCB	VS1-12/630A-25KA	Set	1
		XGN15-12 Inline Switchgear	Set	1		2	Disconecting switch	GN30-12/630-25KA	Set	1
1	SF6 load break swith	FLN36-12/620-20	Set	1		3	Metal plate mechanism		Set	1
2	Operating mechanism	Electric AC2200	Set	1		4	Lighting Arrester	HY5WS 17/50	Set	1
3	Gas meter		Set	1		5	Sensor	CG5-10 140mm	Set	1
4	Interlock for up and down door		Set	1		6	Voltage display	DXN-Q	Set	1
5	Lighting Arrester	HY5WS 17/50	Set	1		7	Electromagnetic lock	DSN-Z 220V	Set	1
6	Sensor	CG5-10 140mm	Set	1		8	Sheet metal	750*916*1885	Set	1
7	Voltage display	DXN-Q	Set	1
8	Electromagnetic lock	DSN-Z 220V	Set	1		NO.	Name	Specification	Unit	Qty
9	Sheet metal	375*916*1635	Set	1				XGN17-12 Outline VCB switchgear	Set	1
						1	VCB	VS1-24/630A-25KA	Set	1
NO.	Name	Specification	Unit	Qty		2	Disconecting switch	GN30-10/630-25KA	Set	1
		XGN15-12 Outline Switchgear	Set	1		3	Metal plate mechanism		Set	1
1	SF6 load break swith	FRLN36-12D/125-31.5	Set	1		4	Lighting Arrester	HY5WS 17/50	Set	1
2	Operating mechanism	Manual A type	Set	1		5	Sensor	CG5-10 140mm	Set	1
3	Gas meter		Set	1		6	Voltage display	DXN-T	Set	1
4	Outline Electromagnetic lock	375#	Set	1		7	Sheet metal	1000*1210*2300	Set	1
5	Lighting Arrester	HY5WS 17/50	Set	1		8	Grounding knife	JN15-12	Set	1
6	Sensor	CG5-10 140mm	Set	1
7	Voltage display	L-6	Set	1		Note;	This price without Copper bar,without current transformer,without seal plate.
8	Fuse	10A-63A	Set	1			extra add 20 usd ,if the Sheet metal need higher one floor or wider one floor
9	Sheet metal	375*1000*1635	Set	1

 

Detailed Photos

 

7.The product photo for the SF6 (SM6) switchgear cabinet  photo

8. The SF6 (SM6) switchgear cabinet photo


 

Packaging & Shipping

 

Our Advantages

After Sales Service